S 60+60 G31T+F+PS

Reference 15440.03

2” Self-priming centrifugal pump in cast iron with mechanical seal, grease-lubricated, non return valve and 5,5 kW electric motor close coupled
+F flange coupling according DIN. PN16
+PS automatic lubricator for mechanical seal

Reference 15440.03

Specifications

Main Features
Pump series	S 60+60
Pump Flow Rate	max 45 m³/h (750 l/min)
Pump head with 50 Hz grid frequency	max 36 m
Max. Solids Handling	24 mm
Self-priming	★★★★★
Heavy-duty	★★★★☆
Construction	Close Coupled

Pump
Type of Pump	Self-priming centrifugal pump
Suction port	DN50
Discharge port	DN50
Type of ports	DIN PN16 flange (compatible), ANSI 150lb flange
Type of self-priming	Wet-prime
Inspection cover for the impeller	Yes
Filling port	Yes
Drain Port	Yes
Plug for Vacumeter	Yes
Plug for the Manometer	Yes
Material of casing	Cast iron
Material of impeller	Cast iron
Material of wear plate	Steel
Material of shaft	Stainless steel AISI316
Material of non-return valve	NBR (Nitrile)
Shaft sealing	YCV Mechanical Seal with Grease Lubrication in SiC/SiO₂/FKM (Viton®) on Stainless Steel Sleeve

Drive
Type of drive unit	Three-Phase Electric Motor
Drive Manufacturer	Victor Pumps
Efficiency class	IE3
Rated Power	5, 5 kW
Maximal Rotation	2900 rpm (50 Hz)
Rated voltage	400 V ±10% @ 50 Hz, 690 V ±10% @ 50 Hz
Protection	15 Amp (380-480 V), 8 Amp (220-277 V)
Cooling method	IC411- TEFC
Protection degree	IP55
Insulation class	F

Performance data
Typical application	waste water with solids in suspension, non-corrosive
Product temperature	max. 60 °C
Ambient temperature	max. 40 °C
Density	up to 1, 1 kg/dm³, for higher values you need an oversized motor
Viscosity	up to 20 mm²s (cSt), for higher values you need an oversized motor
Max vacuum with water	max 8 m (9, 5 m for 10 min)
Max vacuum with air	max 8, 5 m

Additional Features
Setup position	Horizontal
Coupling	One shaft solution without any coupling
Paint	RAL6011 Reseda green
External Dimensions (L x W x H)	see dimensions
Net Weight	see dimensions