Italiano
Deutsch
English
1½” Self-priming centrifugal pump in cast iron with mechanical seal, grease-lubricated, non return valve on carrying frame for 1 person assembled with a 1,1 kW single-phase electric motor.
+SG = carrying frame with ON/OFF switch, 1.5 m cable, and German plug.
Version also available with three-phase motor for S 40, S 45+50, and S 50 pumps.
S 40 G31M+SG
11093
1½” Self-priming centrifugal pump in cast iron with mechanical seal, grease-lubricated, non return valve on carrying frame for 1 person assembled with a 1,1 kW single-phase electric motor.
+SG = carrying frame with ON/OFF switch, 1.5 m cable, and German plug.
Version also available with three-phase motor for S 40, S 45+50, and S 50 pumps.
11093
Specifications
Main Features |
|
|---|---|
| Pump series | S 40 |
| Pump Flow Rate | max 22 m³/h (360 l/min) |
| Pump head with 50 Hz grid frequency | max 15 m |
| Max. Solids Handling | 20 mm |
| Self-priming | ★★★☆☆ |
| Heavy-duty | ★★★★★ |
| Construction | Mobile Pumps |
| Frame | Carring frame for 1-2 people |
Frame |
|
|---|---|
| Suitable for solid ground | Yes |
| Suitable for muddy and sandy terrains | No |
| Lifting hook | No |
| Can be moved by hand | Yes |
| Can be towed with a vehicle | No |
| Towing bar with hook | No |
Pump |
|
|---|---|
| Type of Pump | Self-priming centrifugal pump |
| Suction port | 1½" |
| Discharge port | 1½" |
| Type of ports | Female Thread BSP |
| Type of self-priming | Wet-prime |
| Vaccum pump | No |
| Inspection cover for the impeller | Yes |
| Filling port | Yes |
| Drain Port | Yes |
| Plug for Vacumeter | No |
| Plug for the Manometer | No |
| Material of casing | Cast iron |
| Material of impeller | Cast iron |
| Material of wear plate | Steel |
| Material of shaft | Stainless steel AISI420 |
| Material of non-return valve | NBR (Nitrile) |
| Shaft sealing | YCV Mechanical Seal with Grease Lubrication in SiC/SiO₂/FKM (Viton®) on Stainless Steel Sleeve |
Drive |
|
|---|---|
| Type of drive unit | Single-phase electric motor |
| Drive Manufacturer | Victor Pumps |
| Rated Power | 1, 1 kW |
| Maximal Rotation | 2900 rpm (50 Hz) |
| Rated voltage | 230 V ±10% @ 50 Hz |
| Protection | 10, 5 Amp (220-240 V) |
| Protection degree | IP55 |
| Insulation class | F |
Performance data |
|
|---|---|
| Typical application | waste water with solids in suspension, non-corrosive |
| Product temperature | max. 60 °C |
| Ambient temperature | max. 40 °C |
| Density | up to 1, 1 kg/dm³, for higher values you need an oversized motor |
| Viscosity | up to 30 mm²s (cSt), for higher values you need an oversized motor |
| Max vacuum with water | max 8 m (9, 5 m for 10 min) |
| Max vacuum with air | max 7, 5 m |
Additional Features |
|
|---|---|
| Plug | Schuko plug for 1 Phase with 1, 5 m cable |
| Paint | RAL6011 Reseda green |
| External Dimensions (L x W x H) | see dimensions |
| Net Weight | see dimensions |
Spare parts
There are no spare parts associated with this productAccessories
There are no accessories associated with this productRelated Products ( 0 other products in the same category )
Subject to errors and changes
1½” Self-priming centrifugal pump in cast iron with mechanical seal, grease-lubricated, non return valve on carrying frame for 1 person assembled with a 1,1 kW single-phase electric motor.
+SG = carrying frame with ON/OFF switch, 1.5 m cable, and German plug.
Version also available with three-phase motor for S 40, S 45+50, and S 50 pumps.